Dead Pixels

Dead Pixels

One of the biggest worrys with the new display devices that we buy these days is dead pixels.  Our TVs are LCD or Plasma, the computer monitors are LCD, as are many handheld devices like image storage units, games consoles or even mobile phones.

These units use technology which is based on pixels.  Like if you look closely at a graphic on your computer monitor, the larger it gets the more blocky and squares you can see.  These are graphic pixels.  Its the same with display screen, thousand of minute squares, each on being a pixel, (a red-green-blue phosphor triad). This is what makes up a display screens resolution.  EG, 640×480 or 1280×1024.  These numbers are the x & y pixel numbers that make the resolution.

The higher the number in the x & y the higher the resolution, and normally (depending on the physical size of the screen) the better the picture.

These pixels are basically RGB switches, which show the correct colour depending on what signal is being sent to the display device.  A dead pixel cannot do this and so, on LCD will show as a white dot.  Depending on what you are viewing, this can be very annoying.  If you are just working on word processing documents, it probably doesn’t matter, but on a TV screen or looking at photos, your dont want to see a bright white dot. Plasma dead pixel go dark.

Now cameras are all based on these mp (mega pixel) rating these days, and many of them are 8mp or 10mp.  This is millions of pixels with a x & y value of 3504×2336 or above. This resolution is on the sensor, not the screen so is more important.

A dead pixel on a camera, will mean that the sensor doesn’t record any data in that pixel location when a photo is taken.  This again leaves a white dot.  Now if you are only printing images at 6×4 inches, it probably wont show to the downsizing when printing, but if you are printing large, then there is more chance of it being seen or if you look at it on a monitor

At least with images, you can clone out the dead pixel in a graphics package, but if you have lots to do, it becomes a problem.

Now the reason I am writing this, is a while ago I noticed a white dot on a few of my images, but then havent seen it for a while.  I then noticed 2 white dots on the images I took at Elstead, but it doesnt seems to be on all images.  So I’m a bit confused.  Maybe it is a lazy pixel, if such a thing exists, and only works occassionally, but there are definately 2!

On sensors pixels can be remapped so it displays the same colour and the pixel adjacent to it, but this needs to be done by the manufactuer.  Also, once the sensor starts to be mapped, does to cause other issues, I don’t know?  I also heard, that know sensor are perfect and many are remapping a few dead pixels when sold. The other issue is this could mean not have the camera for upto 3-4 weeks!  Its the wrong time of year for that.

So, I’ve now got to wait to hear how much and how long to see if it is worth doing yet or not.

 

Related Posts:

    None Found

Leave a Reply