Category: Photography

Dead Pixels

Dead Pixels

One of the biggest worrys with the new display devices that we buy these days is dead pixels.  Our TVs are LCD or Plasma, the computer monitors are LCD, as are many handheld devices like image storage units, games consoles or even mobile phones.

These units use technology which is based on pixels.  Like if you look closely at a graphic on your computer monitor, the larger it gets the more blocky and squares you can see.  These are graphic pixels.  Its the same with display screen, thousand of minute squares, each on being a pixel, (a red-green-blue phosphor triad). This is what makes up a display screens resolution.  EG, 640×480 or 1280×1024.  These numbers are the x & y pixel numbers that make the resolution.

The higher the number in the x & y the higher the resolution, and normally (depending on the physical size of the screen) the better the picture.

These pixels are basically RGB switches, which show the correct colour depending on what signal is being sent to the display device.  A dead pixel cannot do this and so, on LCD will show as a white dot.  Depending on what you are viewing, this can be very annoying.  If you are just working on word processing documents, it probably doesn’t matter, but on a TV screen or looking at photos, your dont want to see a bright white dot. Plasma dead pixel go dark.

Now cameras are all based on these mp (mega pixel) rating these days, and many of them are 8mp or 10mp.  This is millions of pixels with a x & y value of 3504×2336 or above. This resolution is on the sensor, not the screen so is more important.

A dead pixel on a camera, will mean that the sensor doesn’t record any data in that pixel location when a photo is taken.  This again leaves a white dot.  Now if you are only printing images at 6×4 inches, it probably wont show to the downsizing when printing, but if you are printing large, then there is more chance of it being seen or if you look at it on a monitor

At least with images, you can clone out the dead pixel in a graphics package, but if you have lots to do, it becomes a problem.

Now the reason I am writing this, is a while ago I noticed a white dot on a few of my images, but then havent seen it for a while.  I then noticed 2 white dots on the images I took at Elstead, but it doesnt seems to be on all images.  So I’m a bit confused.  Maybe it is a lazy pixel, if such a thing exists, and only works occassionally, but there are definately 2!

On sensors pixels can be remapped so it displays the same colour and the pixel adjacent to it, but this needs to be done by the manufactuer.  Also, once the sensor starts to be mapped, does to cause other issues, I don’t know?  I also heard, that know sensor are perfect and many are remapping a few dead pixels when sold. The other issue is this could mean not have the camera for upto 3-4 weeks!  Its the wrong time of year for that.

So, I’ve now got to wait to hear how much and how long to see if it is worth doing yet or not.

 

Back to Nature with Dragons!

Back to Nature with Dragons!

After the last couple of days photographing and talking about aircraft (which have now been added to the Transport section), its back to wildlife.

Yesterday lunchtime I went for a walk to Fleet Pond, but I went a slightly different way. On the way back, I walked past a small stream and saw lots of Demoiselle Damselflies. There were Green, Blue ones and a Golden Orange & Green one! I also saw a few Dragonflies and one Lizard!
So, inspired by this, I headed to Elstead Nature Reserve last night to find some more Dragonflies. None! I saw nothing! So heading back to the car, I was about to give up, when I started to see some wildlife. (this always seems to be the way, nothing, and then lots at the end!) I saw I female Mallard sitting on her Chicks,

ducks.jpg

Then I found this Chaffinch singing in the tree.

chaffinch

chaffinch

I also came across these ducks fighting

ducks

and finally this Damselfly. Sadly I couldn’t get the depth of field deep enough, but its the features on the face that are good.

damsel

All in all, it turned out a good trip

Practice Makes Perfect

Practice Makes Perfect

I thought I’d have a look on the web today to see what results other people got from the airshow.

I was quite surprised.  It looks like people had similar issues to what I was struggling with.  However, I did find one web site where he had some excellent shots.  It looks like all he seems to take is aircraft, so has had a lot of practice.  I know if I had come away with some image like he had, I would have been over the moon.  Anyway, I am please with some or mine, even if there were what I was expecting. So  I am now quite looking forward to the next event, so I can put into practice what I learnt at the weekend.

I haven’t really tried to take photos at an airshow for 2 years, so I think maybe I got to caught up in the event and forgot to keep a close eye on my settings.  Also, the results I got too years ago were quite good, so I had higher expectations than I might have normally had.

Nevermind, practice makes perfect and there are few good events coming up, just some of them aren’t quite as close.

Biggin Hill, the Results

Biggin Hill, the Results

Well I went to Biggin Hill on Saturday, and what lovely weather for it.

So how did I get on? I took lots of photos, and got some good results, however I was a little disappointed as quite a few of the images didn’t turn out a well as expected.

I was hoping to get some good images of the Spitfires, sadly, this didn’t happen, and didn’t get many working images. This was partly due to the flight path they took and also due to me not getting my setting correct. The sun also made it difficult, as at one end it was over exposing a lot (especially on slow shutter) and the other end of the runway, they were under exposing
I also didn’t review my images enough, and being sunny and looking at the small lcd screen on the 20D, made it difficult to see the results. The problem was, yes, I got some nice blur on the props, but as the aircraft got closer, I should have increased the shutter speed, so got a blurred aircraft as well! A lesson learned! Also, I made the mistake of generally having the shutter speed to low, it dropped to 1/100, and I didn’t realise, so this effected a lot of the shots.

These were some of the better ones.

{Q-E}IMG_6441.jpg

{Q-E}IMG_6404.jpg
I also had problems with the Lancaster, again, a too slow shutter speed when trying to take it banking around at a distance. However, I got some really good close ups, and a very good one of it coming towards me. These images on here, are too small to do them justice, but I was pleased with this one.

{Q-E}IMG_6265.jpg

Now, once I had realised I had the shutter speed still set for the propeller aircraft and increased for the jets, I got some nice Red Arrow images.

{Q-E}IMG_6748.jpg

{Q-E}IMG_6774.jpg

I liked this one of them in a line.

I did manage to get some better images of the Kittyhawk and the Mustang. I think though one of my favorites is of the wing walker.

{Q-E}IMG_7218.jpg

I now want to try to go to another show and learn from what I did wrong here. I must keep an eye on the settings, and I believe a lot of the images would have been better if the shutter speed hadn’t dropped so slow. I would have been better off leaving it on auto, but would have possibly had some static looking images. One other good thing, is the I took so many images, it meant that I still have some good results, despite the other problems.

Its June!

Its June!

Crumbs, it June already!  Where is the year going? Its also my birthday next month, another year older!! Time does fly by. On the plus side, hopefully now that it is June, the weather should start to get better, which means I should be able to go out and about a bit more, and there should be lots of interesting things on and places to go.

So coming up, there is the Nokia Craft Fair (internal to the company), the Alton Show, Alton Craft Fair, Dunsfold Wings & Wheels, and many others!

Photographing Aircraft

Photographing Aircraft

Photographing aircraft can be a bit difficult. Based on past experience I have had some success and also some failures.

The first thing is trying to get the aircraft in the viewfinder and focused. I found, that just to get the shot, without worrying about composition, I set the camera to AF Servo mode and centre point focusing. This way I know that the camera will focus for me, and if I keep the aircraft in the centre of the frame, that’s where it will focus and not hunt on the other AF points. (of course it doesn’t always work, but at least you know what you are working with!)

Then, instead of just pointing the camera at the aircraft and keeping your finger half pressed to track the plane, I’ll focus on the plane as soon as it is big enough in the focus point, then lightly half press the shutter button, again and again, focusing in small increments. I found this works well with flying birds and with aircraft, instead of the camera doing all the work. This way, if theS aircraft slips off the focus point, there is less chance it will start to focus on something that doesn’t exist and so waste valuable time refocusing.

Next, exposure. The aircraft will normally be back lit, so a bit of overexposure is required making sure the sky doesn’t disappear to white, particularly on overcast and solid cloud days. A bit of blue sky is good, although can be boring so a bit of both is better.

Now, shutter speed. Not too much of an issue with jets. Keep it high, which it probably will be on auto, pointing it into the sky, but for older planes, like WWII, then you have the propeller issue and need a slower speed.

Too fast and you freeze the propeller, making it look like the aircraft is a static model, too slow and the whole aircraft is blurred. I’ve found between 1/125 & 1/320 seems to do the trick. It also seems to depend on whether the aircraft is coming toward you or passing. The Mustang in yesterdays blog, was coming towards me, and had a shutter speed of 1/640, leaving a little blur. I was lucky for the prop not to be frozen.This image shows a photo with cloud in it, compared to plain sky. It also shows one aircraft where the shutter speed was slightly too high and frozen the prop. The middle photo, seems just right with a shutter speed of 1/200

aircraft.jpg

I think the above is a good guide, but you need to review your images as you take them and make adjustments to the conditions at the time. Of course, doing all of this, whist not missing the aircraft you are trying to photograph that is still flying above you! Thats what I’ll be trying to do this weekend!!

Biggin Hill

Biggin Hill

Well the weather is still wet, however at the moment it looks like Saturday may be ok. Lets hope so, as I am still hoping to go to the Biggin Hill Airshow which is on all this weekend.

Now, I have been to a couple in the past an been lucky with the weather, however one I went to it bucketed it down at the beginning and I remember this poor guy having to fly in an open cockpit WWI tri-plane! I had to try and keep the camera out of the torrential rain, then try and get a photo when the aircraft was in the correct position so as not to get water on the lens. Get an interesting grainy photo though, where the graining was the rain!

triplane.jpg

I have quite good waterproof gear for myself, and some decent protection for the camera, put you still have to keep it off the lens. Luckily that time it didn’t last for long and made for interesting photos, but you don’t want it all the time.

This weekend at Biggin Hill, hopefully I should see, Spitfires, Lancaster, Mustangs, Red Arrows & a Typhoon. Never seen or photographed one of them! Ah, just realised, the Typhoon, is probably going to be the EuroFighter, not the WWII Typhoon, shame… Does a flying on of those exist?.. Short Answer: No.

1 Painted Hallway, 3 New Rulers Designs & 3 Rainy Days

1 Painted Hallway, 3 New Rulers Designs & 3 Rainy Days

Well I seemed to get the weather correct for the weekend. Wasn’t it miserable! I don’t think it stopped raining for more than a couple of hours at any one time! I think this week isn’t going to be any better either (except today, sunshine!). I hope it does get better, as there is an airshow this weekend that I would like to go to.

So, what did I do? Well the hallway now has 1 coat of paint on it. Wow, how interesting!

Yesterday, I designed a couple of new long rulers. I realised that after my trip to Painshill the other week, I now had enough good images to make a nice barn owl long ruler.

This was the result.

I also designed new Red Arrow & another World War II fighter ruler.

These are now on the rulers pages and I have also added some others

and the cat ruler, which I didn’t realise was missing!

As much as I enjoyed getting the painting done, and designing the new rulers, lets hope the weather cheers up soon!

Bank Hoilday, Bad Weather

Bank Hoilday, Bad Weather

As usual it looks like it is going to rain this coming bank holiday weekend. So, as it was nice yesterday, I popped at lunchtime to the local park.

There seemed to be a lot of what looked like small moths flying around, and a few butterflies. I was looking at what I think was a moth, when I suddenly saw a flash of bright orange!

It landed just long enough to get this photo.

Small Copper

Its a Small Copper butterfly, only approx 35mm in size.

It’s incredible how nature manages to make things so small but so pretty.

New Birds of Prey Coasters

New Birds of Prey Coasters

I have now added some new Birds of Prey coaster designs to the Gift pages on the website. Most of these came from my recent trip to Painshill Park, but some are from other places like Birdland and the Hawk Conservancy.

These are all available in other products, like the rulers, bookmarks, mousemats and fridge magnets. Visit the Gift page for more details.

A Lunchtime Walk

A Lunchtime Walk

As the weather was nice and I had the camera, I decided to go for a walk to Fleet Pond.

Despite having the small camera, I still managed to get a reasonable photo of the squirrel!

IMG_0548.jpg

IMG_0550.jpg

I really like the lighting on this one by the pond.

Cutty Sark

Cutty Sark

What sad news this morning on the Cutty Sark. I initially heard there was a fire, and the Barbican was mentioned. Then I heard the it was the Cutty Sark, up in flames. For some reason that made it worse. A fire is bad enough at any time, but hearing it was that landmark was really sad.

Apparently it was under restoration and a lot of the interior had been removed, possibly making it possible to salvage it and restore the remains, but I have also hear reports that there was just the iron exterior remaining with no hull. If that is true, then that has got to be really bad, as that it really the ship. If you replace the hull, then a lot of it originality is gone.

There are also reports that Police are looking at cctv and not ruling out arson. Why would someone want to burn that?

The Cutty Sark is the worlds last Tea Clipper. Built in 1869 to transport tea from China to Britain. when the tea trade was taken over by steamers she transported wool to Australia. When she ended her working life Captain Downman decided she should be preserved and in 1922 made her part of his floating nautical school. His Widow donated the Cutty Sark to the Thames Nautical Training School at Greenhithe in 1938. After the Cutty Sark Preservation Society was formed she was restored to her formal glory.

In the 1990s the ship started to have serious structural problems in the hull. After years of lobbying a lottery grant was awarded and the ship was closed to the public in November 2006 due to be completed in 2009.

As part of the restoration process her rigging and lot of the interior was removed.  Lets hope that that will help with being able to restore what remains, but if her hull has gone, then she will never be the same again.

Excess Packaging

Excess Packaging

I have just bought myself a set of decent headphones for my PSP, to replace the cheapy cheapy 6 euro pair from the airport that didn’t work well on a plane!

These headphones were recommended to me and I had tried them out before buying them this time!

When the parcel arrived this morning, I thought great, this is really good finally a set of headphones that work well! And I was right, they do!

However, I was surprised on opening the envelope, to see this.

package1.jpg

What else was in the package? It looked like a carry strap, and maybe a leaflet of some sort in the top area.

I was wrong. Admittedly, I didn’t expect anything other than the headphones, but this is what I saw

package2.jpg

What a waste! These areas were empty and just extra bits of card. The bottom area of emptyness just had the manufacturers name, and the top part had some text in different languages about the product.

In this day and age of environmental issues and waste recycling this to me seems a waste. The product had the makers name and logo on it, which could be clearly seen. Why duplicate it? The info on the back could have been put on a leaflet inside, and the other bits could have been put on the plastic and in the hanging space.

Ok, maybe this package it also used for another product where the spaces are used, but how many of this are sold, with this excess plastic and cardboard? I am guessing a lot. New packaging costs money, but so does waste. Surely it is better to design compact packing for the product inside. People these days, also think about packaging and how companies are dealing with these issues. It may even put of some people from buying the product.

Now I know this is just one item from one company and that there are a lot of other worse package issues than this, but it did take me by surprise this morning. I think it was that when I opened the back expecting to see at least something in there and not nothing! I suddenly thought what a waste!

Companies in general really need to think, is it better to use 3 types of packing for 9 products with extra waste, or design the package to better fit the products. It does seem in general though that there is a lot of packing waste and excess packing. Its a trade off between, cost, environment, protecting the product etc.. I guess at least I can recycle the cardboard, not sure if the plastic is the correct type though. But recycling costs too!